24 | Setting Up the Monitor
Setting Up the Monitor
Attaching the Stand
NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: This is applicable for a moni
tor with a stand. When any other stand is
bought, please refer to the respective stand setup guide for the set up instructions.
CAU
TION: Do not remove the monitor from the packaging box before attaching
the stand.
To attach the monitor stand:
1 Follo
w the instructions on the flaps of carton to remove the stand from the top
cushion that secures it.
2 Insert the stand base blocks fully into the stand slot.
3 Lif
t the screw handle and turn the screw clockwise.
4 After fully tightening the screw, fold the screw handle flat within the recess.
To Next Page
Loading...
