Setting Up the Monitor | 31
Removing the Monitor Stand
NOTE: To prevent the curved LCD screen from being scratched and damaged
while removing the stand, ensure that the monitor is placed on a soft, clean foam.
Direct contact with hard objects might cause damage to the curved monitor.
NOTE: This is applicable for a monitor with a stand. When any other stand is
bought, please refer to the respective stand setup guide for the set-up instructions
.
To remove the stand:
1 Place the mon
itor on a soft cloth or cushion.
2 Pr
ess and hold the stand release button.
3 Lift the stand up and away from the monitor.
Wall Mounting (Optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1 Place the mon
itor panel on a soft cloth or cushion on a stable, flat table.
2 Remove the stand.
To Next Page
Loading...
