48 | Operating the Monitor
When the monitor enters the Power Save
mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the
OSD
.
NOTE: The message may be
slightly different according to the connected input
signal.
If you press any button other than the power button, the following message will appear
depending on the selected input:
NOTE: The message may be slightly different according to the connected input
signal.
If either USB Type-C, HDMI, or DP input is selected and the corresponding cable is not
connected, a floating dialog box as shown below appears.
NOTE: The message may be slightly different according to the connected input
signal.
See
Troubleshooting
for more information.
To Next Page
Loading...
