8. On your printer operator panel, use the left or right arrow button to scroll to Setup, and
then press the Select button .
9. Use the left or right arrow button to scroll to Network Setup, and then press the Select
button .
10. Use the left or right arrow button to scroll to Wi-Fi Protected Setup, and then press the
Select button .
11. Use the left or right arrow button to scroll to Push Button, and then press the Select
button .
12. Press the Select button to continue.
13. Click Push Button on your router WPS page within two minutes.
If setup is successful, Wi-Fi Protected Setup Successful appears on the printer operator
panel.
Check if the printer's Wi-Fi LED turns blue. For more information, see Wi-Fi LED
. Continue with
step 14
.
If setup is not successful or times out, perform step 8
to step 13 again.
14. Close the router WPS page.
15. Follow the instructions on the installation screen to complete setup.
To Next Page
Loading...
