The following table describes the features available on the front view:
Ite
m
Panels and
slots
Icon Description
1 Left control
panel
N/A Contains VxRail health and VxRail ID, status LED.
2 Hard drives N/A Enable you to install drives that are supported on your VxRail. For more information about
drives, see Technical specifications.
3 Right control
panel
N/A Contains the power button, VGA port, iDRAC Direct micro-USB port and two USB 2.0 ports.
4 Information tag N/A The Information Tag is a slide-out label panel that contains VxRail information such as Service
Tag, Product Serial Number Tag (PSNT), NIC, MAC address, and so on.
Left control panel view
The following figure and table shows the features available on the left control panel:
Ite
m
Indicator Icon Description
1 Status LED indicators N/A Indicate the status of the VxRail. For more information, see Status LED
indicators.
2 VxRail health and
VxRail ID indicator
Indicates the VxRail health. For more information, see VxRail health and VxRail
ID indicator codes.
Status LED indicators
This section describes the condition of the status LED indicators and provides the related corrective actions.
NOTE: The status LED indicators are always off and only turns on to a solid amber if any error occurs.
VxRail overview 11
To Next Page
Loading...
