Dell VxRail P670F - Page 27

1. Riser 4 (slot 7 and slot 8)
2. Riser 3 (slot 4 and slot 5)
3. Riser 2 (slot 3 and slot 6)
4. Riser 1 (slot 1 and slot 2)
The following tables describe the riser configuration and slot priority information of VxRail P670F (Dual-socket) that supports
riser configuration 5: R2A + R4B:
Configuration
Expansion
card risers
PCIe Slots Controlling
processor
height Length Slot width
Config5. with 2x
FH and 2x LP
R2A 3 and 6 Processor 1 and
2
Low profile Half length x16 + x16
R4B 7 and 8 Processor 2 Full height Half length x8 + x8
Card type Slot priority Form factor
HWRAID BOSS S2 Integrated slot N/A
HBA355i front Integrated slot N/A
H755 fPERC Integrated slot N/A
Network Daughter Card (OCP) Integrated slot N/A
BOSS-S1 6,3 Low profile
7,8 Full height
PCIe NIC 25GbE 6,3 Low profile
7,8 Full height
PCIe NIC 10GbE 6,3 Low profile
7,8 Full height
PCIe NIC 100GbE 6,3 Low profile
PCIe FC HBA 6,3 Low profile
Replacement of hardware components 27