Card type Slot priority Form factor
7,8 Full height
Double wide GPU 7,2 Full height
The following tables describe the riser configuration and slot priority information of VxRail P670F (Single-socket) that supports
riser configuration 8: R1B + R2A:
Configuration Expansion
card risers
PCIe Slots Controlling
processor
height Length Slot width
Config8. with 2x
FH and 1x LP
R1B 1 and 2 Processor 1 Full height Half length x8 + x8
R2A 3 Processor 1 Low profile Half length x16
Card type Slot priority Form factor
HWRAID BOSS S2 Integrated slot N/A
HBA355i front Integrated slot N/A
Network Daughter Card (OCP) Integrated slot N/A
BOSS-S1 1 Full height
PCIe NIC 25GbE 3 Low profile
2,1 Full height
PCIe NIC 10GbE 3 Low profile
2,1 Full height
PCIe NIC 100GbE 3 Low profile
PCIe FC HBA 3 Low profile
2,1 Full height
The following table describes the riser configuration of VxRail P670N that supports riser configuration 2: R1A + R2A + R3B +
R4A:
Configurations
Expansion
card risers
PCIe Slots Controlling
processor
height Length Slot width
Config2. with 4x
FH and 2x LP
R1A 2 Processor 1 Full height,
double width
Full length x16
R2A 3 and 6 Processor 1 and
2
Low profile Half length x16 + x16
R3B 4 and 5 Processor 2 Full height Half length x8 + x8
R4A 7 Processor 2 Full height,
double width
Full length x16
The following table describes the slot priority information of VxRail P670N that supports the riser configuration 2: R1A + R2A +
R3B + R4A Full length:
Card type
Slot priority Form factor
HWRAID BOSS S2 Integrated slot N/A
Network Daughter Card (OCP) Integrated slot N/A
BOSS-S1 5 Full height
PCIe NIC 25GbE 6,3 Low profile
5,4,7,2 Full height
28 Replacement of hardware components
To Next Page
Loading...
