Dell VxRail P670F - Page 29

Card type Slot priority Form factor
PCIe NIC 10GbE 6,3 Low profile
5,4,7,2 Full height
PCIe NIC 100GbE 6,3 Low profile
7,2 Full height
PCIe FC HBA 6,3 Low profile
5,4,7,2 Full height
Double wide GPU 7,2 Full height
DPU 2 Full height
The following table describes the slot priority information of VxRail P670N that supports the riser configuration 2: R1A + R2A +
R3B + R4A Half length:
Card type Slot priority Form factor
HWRAID BOSS S2 Integrated slot N/A
Network Daughter Card (OCP) Integrated slot N/A
BOSS-S1 5 Full height
PCIe NIC 25GbE 6,3 Low profile
5,4,7,2 Full height
PCIe NIC 10GbE 6,3 Low profile
5,4,7,2 Full height
PCIe NIC 100GbE 6,3 Low profile
7,2 Full height
PCIe FC HBA 6,3 Low profile
5,4,7,2 Full height
Single wide GPU 7,2 Full height
The following table describes the riser configurations of VxRail V670F:
Configurations
Expansion
card risers
PCIe Slots Controlling
processor
height Length Slot width
Config1. with 6x
FH and 2x LP
R1B 1 and 2 Processor 1 Full height Half length x8 + x8
R2A 3 and 6 Processor 1 and
2
Low profile Half length x16 + x16
R3B 4 and 5 Processor 2 Full height Half length x8 + x8
R4B 7 and 8 Processor 2 Full height Half length x8 + x8
Config2-1. with 4x
FH and 2x LP
R1A 2 Processor 1 Full height,
double width
Full length x16
R2A 3 and 6 Processor 1 and
2
Low profile Half length x16 + x16
R3B 4 and 5 Processor 2 Full height Half length x8 + x8
R4A 7 Processor 2 Full height,
double width
Full length x16
The following table describes the slot priority information of VxRail V670F that supports the riser configuration 1: R1B + R2A +
R3B + R4B:
Replacement of hardware components
29