Dell VxRail P670F - Page 30

Card type Slot priority Form factor
HWRAID BOSS S2 Integrated slot N/A
HBA355i front Integrated slot N/A
H755 fPERC Integrated slot N/A
Network Daughter Card (OCP) Integrated slot N/A
BOSS-S1 6,3 Low profile
8,7,5,4,2,1 Full height
PCIe NIC 25GbE 6,3 Low profile
8,7,5,4,2,1 Full height
PCIe NIC 10GbE 6,3 Low profile
8,7,5,4,2,1 Full height
PCIe NIC 100GbE 6,3 Low profile
PCIe FC HBA 6,3 Low profile
8,7,5,4,2,1 Full height
T4 Single wide GPU 6,3 Low profile
8,7,5,4,2,1 Full height
A2 Single wide GPU 5,1,7,2 Full height
The following table describes the slot priority information of VxRail V670F that supports the riser configuration 2-1: R1A + R2A +
R3B + R4A:
Card type
Slot priority Form factor
HWRAID BOSS S2 Integrated slot N/A
HBA355i front Integrated slot N/A
H755 fPERC Integrated slot N/A
Network Daughter Card (OCP) Integrated slot N/A
BOSS-S1 6,3 Low profile
7,5,4,2 Full height
PCIe NIC 25GbE 6,3 Low profile
5,4,7,2 Full height
PCIe NIC 10GbE 6,3 Low profile
5,4,7,2 Full height
PCIe NIC 100GbE 6,3 Low profile
7,2 Full height
PCIe FC HBA 6,3 Low profile
5,4,7,2 Full height
Double wide GPU 7,2 Full height
The following table describes the riser configurations of VxRail S670:
30
Replacement of hardware components