Dell W21C User Manual

Replacing the memory module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
NOTE: Replace the DIMM2, and then replace the DIMM1.
1 Align the notch on the memory module with the tab on the memory-module slot.
2 Slide the memory module rmly into the slot at an angle.
3 Press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and
reinstall it.
Post-requisites
1 Replace the system-board shield.
2 Replace the back cover.
3 Replace the stand.
30

Dell W21C Specifications

General

Brand	Dell
Model	W21C
Category	Desktop
Language	English