Configuring System Settings 35
WDM
Use the WDM Agent Configuration dialog box (click WDM) to configure the Wyse
Device Manager server location.
TIP: It is recommended that after configuring, you reboot the thin client.
To configure the WDM server location:
1. Enter the WDM Server IP address.
2. Enter the Non-secure Port (HTTP) for client to server communication (default, is
80).
3. Enter the Secure Port (HTTPS) for client to server communication (default is 443).
4. Select the Discovery Settings you want. For more information on WDM, see your
WDM documentation.
5. Click OK.
TIP: Note that you can also configure the WDM server location through INI files (wlx.ini)
or the DHCP Option tag 186 (see "Central Configuration: Automating Configurations").
To Next Page
Loading...
Need help?
General
