Removing the base cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Remove the eight screws (M2x3, Torx) that secure the base cover to the palm-rest assembly.
2 With the computer face-down, open the computer at an angle.
3 Using a plastic scribe, pry the base cover from the palm-rest assembly.
6
Removing the base cover 15
To Next Page
Loading...
