Dell XPS 9380 - 26 Removing the Power Button with Optional Fingerprint Reader; Prerequisites; Procedure

Removing the power button with optional
ngerprint reader
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the solid-state drive.
4 Remove the fans.
5 Remove the system board.
Procedure
NOTE
: If the power button does not include the ngerprint reader, perform only steps 1 and 3. Complete all steps if the power
button includes the ngerprint reader.
1 Remove the two screws (M1.4x1.7) that secure the power button to the palm-rest assembly.
2 Remove the screw (M1.6x1.5) that secures the ngerprint-reader board to the palm-rest assembly.
3 Lift the power button from the palm-rest assembly.
4 Peel and lift the power button cable from the keyboard.
5 Lift the ngerprint-reader board from the palm-rest assembly.
26
48 Removing the power button with optional ngerprint reader