116 TV Antenna Connector
11
Remove the bluetooth card (see "Removing the Bluetooth Card" on
page 55).
12
Follow the instructions from step 13 to step 18 in "Removing the Top
Cover" on page 79.
13
Disconnect the speaker cable from the connector on the I/O board.
14
Turn the top-cover assembly over.
15
Remove the I/O board (see "Removing the I/O Board" on page 111).
16
Make note of the TV antenna connector cable routing and remove the
cable from the routing guides.
17
Remove the two screws that secure the TV antenna connector to the top
cover.
1 speaker cable
To Next Page
Loading...
