The fan air lter media slides into the frame from the top. No tools are required.
1 Determine which lters to replace.
2 Unlatch and remove the rst module that needs the lter replaced.
3 Slide the existing lter upwards to remove it from the module.
4 Replace the lter with a new lter of the same size.
5 Repeat for the remaining modules that need the lter replaced.
After Z9100–ON installation
After you have securely installed and powered on the Z9100-ON, to congure your system, see your third-party ONIE-compatible OS
documentation or the Dell OS documentation.
Fans 33
To Next Page
Loading...
