41
OVEN
The oven with smooth enamel must be cleaned after every use, using suitable prod-
ucts. Please note that after using the oven for 30 minutes on the highest temperature
eliminates most grime reducing it to ashes.
Do not use abrasive substances to clean the oven.
ADVICE FOR USE AND MAINTENANCE OF CATALYTIC
PANELS (main oven)
The catalytic panels are covered with special microporous enamel which absorbs and
does away with oil and fat splashes during normal baking over 200°C.
If, after cooking very fatty foods, the panels remain dirty, operate the oven “idling” on
max temperature for about 30 minutes. These panels do not require to be cleaned,
however it is advised to periodically remove them from the oven (at least the side pan-
els) and to wash them with tepid soapy water and then wipe off with a soft cloth.
DO NOT CLEAN OR WASH THEM WITH ABRASIVE PRODUCTS OR WITH
PRODUCTS CONTAINING ACIDS OR ALKALIS.
The side panels are reversible and when the catalytic microporous enamel degrades,
they can be turned to the other side.
GAS TAPS
If the gas taps are not working properly, call our Customer Service Centre to obtain the
nearest Authorized Delonghi Service Agent.
REPLACING THE OVEN LIGHT
Before any maintenance is started involving electrical parts of the
appliance, it must be disconnected from the power supply.
The bulb must be a type resistant to high temperatures (300° C).
GRILL HEATING ELEMENT
The heating element is self-cleaning and does not require maintenance.
To Next Page
Loading...
