Delta Electronics A10 - Page 255

Chapter 4 Macro Function|ScrEdit Software User Manual
4-34 Revision Apr. 30th, 2007, 2007PDD23000002
 INITCOM
INITCOM → Initial setup COM port to start communication and set communication protocol.
Fig. 4.3.2 INITCOM
Fig. 4.3.3 Variable2 settings in INITCOM (communication protocol)
Fig. 4.3.4 COM port
Fig. 4.3.5 Communication interface
Fig. 4.3.6 Data Bit
Fig. 4.3.7 Parity bit
Fig. 4.3.8 Stop bit
Fig. 4.3.9 Baud rate