TABLE OF CONTENTS
SAFETY RULES 3
ADDITIONAL SAFETY RULES FOR DRILL PRESSES 4
UNPACKING 5
CLEANING 6
ASSEMBLY INSTRUCTIONS 6-9
FASTENING DRILL PRESS TO A SUPPORTING SURFACE 9
MOTOR SPECIFICATIONS AND ELECTRICAL REQUIREMENTS
Motor Specifications 10
Power Connections 10
Extension Cords 10
Grounding Instructions 11
SPINDLE SPEEDS 12
CHANGING SPINDLE SPEEDS AND ADJUSTING BELT TENSION 13
SWITCH 14
LOCKING SWITCH IN THE “OFF” POSITION 14
TABLE ADJUSTMENTS 14-15
DRILLING HOLES TO DEPTH 16
ADJUSTING SPINDLE RETURN SPRING 16
OPERATION
Correct Drilling Speeds 17
Boring In Wood 17
Drilling In Metal 17
WARRANTY
To Next Page
Loading...
