AS Series Operation Manual
6-34
Press Insert on the keyboard to switch between inserting and replacing an item in the monitoring table. The
selected mode displays in the status bar in ISPSoft.
If you select insert mode, the new item is added above the selected item in the monitoring table. If you select
replacement mode, the new item overwrites the selected item in the monitoring table.
To hide certain columns in the monitoring table, right-click the monitoring table, point to Set the Fields, and
clear certain items. After you clear an item, the corresponding column disappears.
The following describes the columns in the monitoring table.
Column Description
Source Source of a symbol
Identifier Identifier of a symbol
Device name Name of a monitored device
Status State of a monitored bit device or a contact (ON or OFF).
To Next Page
Loading...
Need help?
General
