Delta AS200 Series User Manual

AS Series Operation Manual
9-20
_9
3. Set up the IP address
 Double-click the listed MAC address for your device to open the Input Data dialog box.

Enter the IP address and click OK.
4. Disable DHCP/BOOTP
Click the device in the Mapping Table that you want to disable, then click Disable DHCP/BOOTP. The selected
device does not send DHCP/BOOTP requests. To change the IP address receiving mode, refer to Section 9.4.2.4
for more information.

Delta AS200 Series Specifications

General

Brand	Delta
Model	AS200 Series
Category	Control Unit
Language	English