Delta AS200 Series User Manual

AS Series Operation Manual
10-32
_10
A. Right click the AS300 Series PLC icon in HWCONFIG, then click Communication Software, and
then click CANopen Builder.
B. IF AS300 is in master mode, you can skip this step. If not, you can go to Properites and set it in
Master mode. After that download the parameter to AS300. Set AS300 Power off for 2 seconds
and supply power again and then proceed to the next step.

Delta AS200 Series Specifications

General

Brand	Delta
Model	AS200 Series
Category	Control Unit
Language	English