ASDA-A2 Chapter 11 Specifications
11-24 Revision February, 2017
20 ~ 90%RH (non-condensing)
20 ~ 90%RH (non-condensing)
IP65 (use the waterproof connector and shaft seal installation (or oil
seal) model)
Note:
*1 The rated torque is the continuous permissible torque between 0~40˚C operating temperature which is
suitable for the following heat sink dimension.
ECMA-_ _ 08：250 mm x 250 mm x 6 mm
ECMA-_ _ 13：400 mm x 400 mm x 20 mm
ECMA-_ _ 18：550 mm x 550 mm x 30 mm
ECMA-_ _ 22：650 mm x 650 mm x 35 mm
Material type: Aluminum –F80, F130, F180, F220
*2 The built-in brake of the servo motor is for remaining the item in stop status. Do not use it to decelerate or
as the dynamic brake.
3 Model of ECMA-L11308 is applying for UL approval.
To Next Page
Loading...
