Delta ASD-A2R-0221 Series - Page 367

Chapter 8 ParametersASDA-A2R Series
Revision December, 2014
8-135
Range：
0 ~ 32767
Data Size：
16bit
Format：
DEC
Settings：
Manually adjust the hardware offset. The adjustment function
needs to be enabled by the setting of parameter P2-08. It is not
suggested to adjust the auxiliary adjustment. This parameter
cannot be reset.
P4-19 TIGB
IGBT NTC Adjustment Detection Level
(cannot reset)
Address: 0426H
0427H
Operational
Interface：
Panel / Software Communication
Related Section: -
Default：
Factory default
Control
Mode：
ALL
Unit：
-
Range：
1 ~ 4
Data Size：
16bit
Format：
DEC
Settings：
Please cool down the drive to 25 Celsius degree when adjusting
P4-20 DOF1
Offset Adjustment Value of Analog
Monitor Output (Ch1)
Address: 0428H
0429H
Operational
Interface：
Panel / Software Communication
Related Section:
6.4.4
Default：
0
Control
Mode：
ALL
Unit：
mV
Range：
-800 ~ 800
Data Size：
16bit
Format：
DEC
Settings：
Offset adjustment value (cannot reset)