Delta ASD-A2R-0221 Series - Page 435

Chapter 8 ParametersASDA-A2R Series
Revision December, 2014
8-203
Failure code
F0F1h
When executing this macro, E-Cam is not engaged.
E-Cam has to engage to change the engaged position.
Failure code
F0F2h
The setting value of P5-93.YX (PR number of going
trip) exceeds the range: 0 ~ 0x3F
Failure code
F0F3h
The setting value of P5-93.UZ (PR number of return
trip) exceeds the range: 0 ~ 0x3F
Failure code
F0F5h
The setting value of P5-95 (Avaliable forward rate)
exceeds the range: 0 ~ 100 (％)
Failure code
F0F6h
The setting value of P5-96 (target position) exceeds
the range: 0 ~ (P5-84/P5-83) - 1