3. Instruction Set
higher 8 bits. The storage format is shown as below. (E.g. Dest is D10, Len is 2 which is the
number of messages stored in D5.)
D device no. Value
D5 2
D device no. Higher 8 bits Lower 8 bits
D10 The second byte in the first message The first byte in the first message
D11 The forth byte in the first message The third byte in the first message
D12 The sixth byte in the first message The fifth byte in the first message
D13 The eighth byte in the first message The seventh byte in the first message
D14
The second byte in the second
message
The first byte in the second message
D15
The forth byte in the second
message
The third byte in the second
message
D16
The sixth byte in the second
message
The fifth byte in the second message
D17
The eighth byte in the second
message
The seventh byte in the second
message