Chapter 9 Ethernet Specification and Operation
9-53
Instance
Attribute
Name
Access
Rule
Data Type Values Description
H’06 Host Name Get/Set STRING Device name Device name
H’13
Encapsulation
Inactivity Timeout
Get/Set UINT 120
EIP device active connection time;
unit:0-3600 seconds
*1 Interface Status
Status Description
0 The Interface Configuration attribute has not been configured.
1
The Interface Configuration attribute contains valid configuration obtained from BOOTP, DHCP or non-
volatile memory.
2 The Interface Configuration attribute contains valid configuration obtained from hardware.
*2 Interface Capability Flags
Bit Description
0 BOOTP Client
1 DNS Client
2 DHCP Client
3 DHCP-DNS Update
4 Configuration Settable
5 Hardware Configurable
6 Interface Configuration Change Requires Reset
*3 Interface Configuration Control
Status Description
0
The device uses the interface configuration values previously stored (for example, in non-volatile
memory or through hardware switches).
1 The device obtains its interface configuration values through BOOTP.
2 The device obtains its interface configuration values through DHCP on start-up.
To Next Page
Loading...
