Appendix A Installing a USB Driver
A-3
3. After the computer restarts, under Choose an option, click Troubleshoot. Under Troubleshoot, click
Advanced options.
4. On the Advanced options page, click Startup Settings, and then on the Startup Settings page, click
Restart to restart the computer.
5. Press the 7 or F7 key on your keyboard to choose Disable driver signature enforcement. Press Enter
and the system directs you back to the Windows 8 operating system. Install the Delta PLC USB driver now
by connecting the DVP-ES3 Series CPU module to your computer’s USB port. Refer to Section A2 for the
steps to install the USB driver.
To Next Page
Loading...
Need help?
General
