- Use care not to touch hot surfaces if the inverter is just shutting down.
- Do not perform any task until the product cool down sufficiently.
CAUTION : HOT SURFACES, DO NOT TOUCH !
The inverter weighs more than 84 kg (185 lb).
There is risk of injury if the inverter is carried incorrectly or dropped during
transport or when attaching or removing it from the wall mounting bracket.
Personnel should wear suitable gloves to protect against injury and maintain
firm control of the inverter chassis
CAUTION : POSSIBILE INJURY !
Use care when handling mounting hardware
Do not leave loose screws and nuts inside the wiring box compartment.
ATTENTION
102
Maintenance
To Next Page
Loading...
