English-5
Ambient Conditions of Installation
Operation temperature: 0°C ~ 55°C (32°F ~ 131°F)
To ensure the product’s reliability performance, it is suggested to keep the ambient
temperature below 45°C during long-time operation. When the temperature is over 45°C,
please place the product in a well-ventilated electric box without overheating problem. In
addition, pay attention to the vibration of the machine, and check if it will influence the
electronic devices of the electric box.
Please pay attention to the matters below in order to retain the warranty coverage and for
future maintenance:
The product should be installed in the environment without over-heat device, water
drop, vapor, dust, oily dust, corrosive and inflammable gas, liquid, airborne dust,
metal particles; and the environment should be solid without vibration and
interference of electromagnetic noise.
Make sure the installation site is of the temperature and humidity within the range
stipulated in the product specification.
Installation Method and Space
NC200 series controller must be installed vertically on a dry and robust platform that is also
NEMA standards-compliant. For good ventilation and cooling efficiency, sufficient
clearance (50 mm or 2 inches) must be maintained between adjacent objects and partitions
(walls) surrounding the product. In addition, do not block the vent holes of the partitions
(walls) as overheating will cause malfunction.
Dimensions
NC200A-LI-A_
To Next Page
Loading...
