Delta RPI M6A Quick Installation Guide

22
Quick installation guide for solar inverters RPI M6A M8A M10A EU V4 EN 5013221703 00 2017-11-16
Commissioning – further settings (optional)
Date and time
E-Today: 0kWh
Power: 0W
Status: On Grid
12.Jun 2016 15:32
1. If the default information is displayed, press the
ESC
button to open the main menu.
Otherwise, press the
ESC
button repeatedly until the main menu is displayed.
Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT
2. Use the and buttons to select the General Settings entry and then press
the
ENT
button.
Baud rate
Date & Time
Language
3. Press the and buttons to select the entry Date and Time and press the
ENT
button.
1 2.Jun 2016 14:55
4. Use the and buttons to congure the value and then press the
ENT
button.
Repeat the procedure for the other settings.
Inverter ID
If multiple inverters are connected to the PV system then a different inverter ID must set for each inverter. For example,
the inverter ID is used by monitoring systems to uniquely identify each inverter.
E-Today: 0kWh
Power: 0W
Status: On Grid
12.Jun 2016 15:32
1. If the default information is displayed, press the
ESC
button to open the main menu.
Otherwise, press the
ESC
button repeatedly until the main menu is displayed.
Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT
2. Use the and buttons to select the Install Settings entry and then press
the
ENT
button.
Password: * * * *
energy production
Adj. would effect
Warning:
3. This function is protected with password 5555.
Use the
and buttons to set the individual numerals.
Press the
ENT
button to conrm a numeral.
Grid Settings
Country
Insulation
Inverter ID: 001
4. Use the buttons and to select the entry Inverter ID and press the
ENT
button.
ID=001
Setting ID:
5. Use the and buttons to congure the value and then press the
ENT
button.

Delta RPI M6A Specifications

General

Brand	Delta
Model	RPI M6A
Category	Inverter
Language	English