15
Installation guide for solar inverters RPI M6A M8A M10A EU V5 EN 2022-08-15
7. Fit the housing and nut and screw the nut tight.
8. Plug the AC plug into the AC connection on the inver-
ter and tighten.
9. Fasten the AC cable with a strain relief element.
10. If the inverter is connected to a grid without a neutral
conductor, the AC connection type must be changed
using the display to 3P3W after commissioning, see
”AC connection type”, page 23.
Connecting the grid (AC)
To Next Page
Loading...
Need help?
General
