◼ Please read this manual carefully before usage in order to ensure proper usage
and the safety of the maintenance staff.
◼ Due to operational environment and operator safety considerations, our
company will provide dedicated training for the operators of different servo
press applications in order to ensure usage safety. Please contact our company
or your local dealers if training is needed.
◼ Please perform wiring properly according to this manual; wiring must be
performed by personnel with related professional knowledge or licenses.
◼ Cannot be used on production lines that are flammable, explosive, toxic or has
the risk of being sprayed by liquids.
◼ Please select a suitable model according to the load capability; do not overuse
specifications that exceed the machine model specifications.
◼ The servo press is a partially completed machine; the assembly and
construction of the protection and safety circuit should be the responsibility of
the final system integrator.
◼ All children and visitors should keep a safe distance from the processing area.
◼ Do not wear loose clothes, ties, rings or bracelets and wear protective nets to
protect long hair as these things can easily get caught in the machine by
accident and cause injuries to the staff or cause other dangers during
operation.
◼ Please turn off the power, isolate the power properly and wait for the servo
press to stop completely when the servo press is no longer used before you
leave.
◼ Please confirm that there is no one along the fence before operating the servo
press and performing operations.
◼ Do not laugh or talk to other workers while operating the servo press; such
wrong behaviors may result in collision of the servo press or injuries to other
workers.
◼ Please have the senior supervisor keep the internal/external mode selection
switch key; do not place it randomly or leave it inserted on the selection switch
as doing so may result in other personnel activating the servo press
accidentally, causing injuries to the workers.
◼ Please use slow speed operations when operating the servo press manually for
the first time, otherwise being unfamiliar with the operations may result in
damage to the servo press due to impact or cause injuries to other workers.
◼ Please do not turn the power on and off frequently as doing so may result in
damage to the controller.
◼ Improper operations might damage the servo press.
◼ When collisions happen to the servo press, please turn off the power of the
servo press first and then check the components and cables of the servo press
to make sure they were not damaged before turning the power back on to
perform operations again.
◼ Please use a safety lock on the fence switch when entering the fence to operate
the servo press in order to prevent the fence from closing suddenly causing the
servo press to be activated accidentally.
To Next Page
Loading...
Need help?
General
