◼ The location of the interlock switch between the structure of the safety
protection device and the protection device should comply with EN ISO 14120
and EN ISO 14119 standards, and the safety distance should be designed
according to EN ISO 13857 standards.
◼ Do not operate the press when light curtain, safety guard, or safeguards are
not provided.
◼ Do not operate the press under out of limit.
◼ Short-circuiting of any safety protection signals on the controller is strictly
prohibited, otherwise our company will not be held responsible for any work
accidents that may occur.
◼ When operating the servo press all personnel are prohibited from standing
close or within the servo press working range; doing so will cause injuries to the
other workers.
◼ Do not unplug any cables on the controller while the servo press is operating;
doing so will cause damage to the controller.
◼ Do not open the protective cover or protection device while the machine and
servo press are operating.
To Next Page
Loading...
Need help?
General
