◼ Please perform maintenance and inspection work properly according to the
manual in order to prolong the usage life of the servo press.
◼ Please add a safety lock on the power switch of the power box when
performing maintenance or repair operations on the servo press, and place a
“Do not power on” safety warning at an obvious place.
◼ Make sure foreign objects do not get attached or enter the servo press when
performing maintenance or inspection.
◼ Making random oil changes during maintenance may result in damaging the
performance of the servo press or to the mechanical components.
◼ Protection devices and repair doors in the danger areas that need to be opened
or removed regularly for the purpose of operations, maintenance, cleaning and
configuration should be interlocking.
◼ Personnel performing maintenance or repairs on the servo press or servo press
system should receive the necessary process training in order to execute the
tasks required. Also use only genuine materials, or else it might cause grave
danger to the users.
◼ The processing of waste materials should comply with local laws and
regulations, and should be treated carefully.
◼ Random changes to the maintenance schedule of the servo press and
maintenance oil are strictly prohibited.
◼ Maintenance and inspection to the controller and servo press are prohibited
while power is being supplied or else it may cause electrical shocks or injuries
to the workers.
◼ When a servo press component is damaged, replacing with other brand
components is prohibited as doing so many result in damaging the
performance of the servo press or the components.
◼ When internal components of the controller are damaged, replacing them with
other brand components is prohibited; doing so may cause accidents or result
in decreasing the safety performance levels.
◼ The power control box must not be opened within 10 minutes of powering off
because the residual voltage in the driver may cause electrical shocks.
To Next Page
Loading...
Need help?
General
