What to do if my Delta Ultron HPH-40K UPS is overloaded?
If your Delta UPS is overloaded, it means the connected equipment is drawing more power than the UPS can supply. To resolve this, remove some unnecessary devices to reduce the total load.
How to fix an over temperature issue on a Delta UPS?
If your Delta UPS is overheating, take the following steps: 1. Ensure the UPS is in a well-ventilated area. 2. Reduce the amount of load on the UPS. 3. Check if the fans are running correctly.
What to do if my Delta UPS has a battery low shutdown?
If your Delta UPS is experiencing a battery low shutdown, it indicates that the battery voltage is low. To resolve this, charge the batteries.
What to do if my Delta Ultron HPH-40K UPS says 'battery reversed'?
If the Delta UPS indicates that the batteries are reversed, it means the batteries are connected with incorrect polarity. Please check the batteries' polarity to ensure they are correctly connected.
What to do if my Delta UPS shows 'input phase sequence fail'?
If your Delta UPS shows an input phase sequence failure, it indicates that the input phase sequence is incorrect. Check the input phase sequence to ensure it is correct.
How to fix LCD error or no response on Delta Ultron HPH-40K?
If your Delta UPS LCD shows an error or is not responding, it could be due to an LCD failure, communication issue, or noise interference. Try resetting the LCD by simultaneously pressing the UP and DOWN function keys for about 5 seconds.
What to do if Delta Ultron HPH-40K displays 'PFC ambient over temp. fail'?
If your Delta UPS shows a PFC ambient over temperature failure, it means the UPS temperature is too high. Here's what you can do: 1. Make sure the UPS is in a well-ventilated area. 2. Reduce the load on the UPS. 3. Check that the fans are running normally.
What to do if my Delta Ultron HPH-40K UPS says 'bypass phase sequence fail'?
If your Delta UPS displays a bypass phase sequence failure, it means the bypass phase sequence is incorrect. Please check the bypass phase sequence.
Safety guidelines for installing the UPS, including ventilation and qualified personnel.
Precautions for connecting the UPS to mains and bypass sources, ensuring proper grounding.
Guidelines for using the UPS, including load types, interference, and ventilation.
Highlights key functionalities and features of the HPH series UPS.
Describes how the UPS operates in online mode, supplying power via the inverter.
Details the ECO mode operation for improved efficiency when AC power is stable.
Describes UPS operation when input AC power is out of the working range.
Explains how the UPS operates in bypass mode, supplying AC power directly.
General safety and procedural recommendations before installation.
Detailed instructions for wiring the UPS, including precautions and cable specs.
Specific warnings and guidelines for connecting external battery cabinets.
Important checks and warnings before starting up or shutting down the UPS.
Step-by-step guides for starting the UPS in various modes.
Step-by-step guides for safely turning off the UPS in various modes.
Guides through settings for bypass, mode, output, battery, parallel, dry contact, general.
General| Model | Delta Ultron HPH-40K |
|---|---|
| Category | UPS |
| Power Capacity | 40 kVA / 40 kW |
| Topology | Double Conversion Online |
| Input Voltage | 380/400/415V AC (3-phase) |
| Output Voltage | 380/400/415V AC (3-phase) |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Efficiency (AC-AC) | Up to 96% |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Battery Backup Time | Depends on the configuration |
| Operating Temperature | 0°C to 40°C |
| Humidity | 0 ~ 95% (non-condensing) |
| Communication Interface | RS232, USB, SNMP (optional) |
To Next Page