13
MITER GAUGE STORAGE
The miter gauge can be stored on the side of the Unisaw
cabinet as shown in Fig. 17A.
FIG. 18
W
G1
FIG. 17A
DUST PORT REDUCER
The Unisaw comes with a 5" (127 mm) dust hose adpator
(W) Fig. 18 installed. Also included is a 5" (127 mm) to 4"
(102 mm) dust port reducer (G1).
To install the dust port reducer, firmly slide the reducer (G1)
Fig. 18 onto the dust hose adaptor (W).
FENCE SYSTEM
Before using the saw or making other adjustments, install
and align the fence included, according to the fence
instruction manual.
Follow all fence operating and safety rules found in
Machine Use section in the back of this manual.
To Next Page
Loading...
