Delta VFD-EL-W Series User Manual

Chapter 4 Parameters  VFD-EL-W
4-104
Parameter Function Settings Default
End
user’s
master
End
user’s
slave
Note
01.00
Maximum
Output
Frequency
(Fmax)
50.00–400.0 Hz 60.00 60.00 60.00
Follows the specifications of
pumps 01.01
Motor Rated
Frequency
(Fbase)
0.10–400.0 Hz 60.00 60.00 60.00
01.02
Motor Rated
Voltage
(Vbase)
230V series: 0.1–255.0 V 220.0 220.0 220.0
460V series: 0.1–510.0 V 440.0
01.09 Accel. Time 1 0.1–600.0 / 0.01–600.00 sec. 10.0 0.5 0.5
Adjusts according to
customer’s applications
01.10 Decel. Time 1 0.1–600.0 / 0.01–600.00 sec. 10.0 5.0 5.0
01.12 Decel. Time 2 0.1–600.0 / 0.01–600.00 sec. 10.0 3.0 3.0
The time the AC motor drive
decelerates to stop when the
pressure reaches the setting
value.
Parameter Function Settings Default
End
user’s
master
End
user’s
slave
Note
02.00
First Master
Frequency
Command
Source
0: Digital keypad UP/DOWN
keys or Multi-function
Inputs UP/DOWN.
1: 0–10 V from AVI
2: 4–20 mA from ACI
3: RS-485 (RJ45)
communication
4: Digital keypad
potentiometer
0 2 2
Adjusts according to
customer’s applications
02.01
First Operation
Command
Source
0: Digital keypad
0 0 0
Adjusts according to
customer’s applications
1: External terminals.
Keypad STOP/RESET
enabled.
2: External terminals.
Keypad STOP/RESET
disabled.
3: RS-485 communication.
Keypad STOP/RESET
enabled.
4: RS-485 communication.
Keypad STOP/RESET
disabled.
Parameter Function Settings Default
End
user’s
master
End
user’s
slave
Note
10.00
PID Set Point
Selection
0: Disable
0 1 1
Adjusts according to
customer’s applications
1: Digital keypad UP/DOWN
keys
2: Reserved
3: Reserved

Delta VFD-EL-W Series Specifications

General

Brand	Delta
Model	VFD-EL-W Series
Category	DC Drives
Language	English