Chapter 12 Description of Parameter SettingsMS300 (High Speed Model)
12-01-11
Time Unit for Acceleration / Deceleration and S Curve
Factory Setting: 0
Settings 0: Unit 0.01 sec.
1: Unit 0.1 sec.
Time for CANopen Quick Stop
Factory Setting: 1.00
Settings
Pr. 01-45 = 0: 0.00~600.00 sec.
Pr. 01-45 = 1: 0.0~6000.0 sec.
It is used to set the time decelerating from maximum operation frequency (Pr. 01-00) to 0.0 Hz by
CANopen control.
To Next Page
Loading...
