Chapter 13 Warning CodesMS300 (High Speed Model) 
 
13-4
ID No.  Display  Descriptions 
56 
 
PLC checksum error 
57 
 
PLC end command is missing 
58 
 
PLC MCR command error 
59 
 
PLC download fail 
60 
 
PLC scan time fail 
73 
 
Bus-off detected 
74 
 
No network power 
75 
 
Factory default setting error   
76 
 
Serious internal error 
78 
 
Profibus parameter data error 
79 
 
Profibus configuration data error 
80 
 
EtherNet link fail 
81 
 
Communication time-out for communication card and drive     
82 
 
Check sum error for communication card and drive 
83 
 
Communication card returns to default setting 
84 
 
Modbus TCP exceed maximum communication value 
85 
 
EtherNet/IP exceed maximum communication value 
86 
 
IP fail 
87 
 
Mail fail 
88 
 
Communication card busy