Delta VFD9A0MS43ANSAA User Manual

Chapter 12 Descriptions of Parameter SettingsMS300
301
Settings
Functions
Descriptions
24
FWD JOG
command
This function is valid when the source of the operation
command is the external terminal. ON: the drive executes
forward JOG. When executing the JOG command in torque
mode, the drive automatically switches to speed mode. The
drive returns to torque mode after the JOG command is
complete.
25
REV JOG command
This function is valid when the source of the operation
command is the external terminal. ON: the drive executes
reverse JOG. When executing the JOG command in torque
mode, the drive automatically switches to speed mode. The
drive returns to torque mode after the JOG command is
complete.
26
TQC / FOC mode
selection
ON: TQC mode, OFF: FOC mode.
27
ASR1 / ASR2
selection
ON: the speed is adjusted by the ASR 2 setting. OFF: the
speed is adjusted by the ASR 1 setting. Refer to Pr.11-02 for
details.
28
Emergency stop
(EF1)
ON: the output of the drive stops immediately, displays “EF1”
on the keypad, and the motor is in free run status. The drive
keeps running until the external fault is cleared after you press
RESET on the keypad (EF: External Fault).

Delta VFD9A0MS43ANSAA Specifications

General

Brand	Delta
Model	VFD9A0MS43ANSAA
Category	DC Drives
Language	English