DencoHappel MATRIX OP21C User Manual

Technical Description MATRIX control panel
12 PR-2011-0110-GB • Subject to modifications • R9-03-2016
4 Technical Description
4.1 Product features and functions
The MATRIX control panels are designed to control DencoHappel air treatment
units and are available in two types:
– Series OPxxC (Comfort) for normal environment (IP20) and
– Series OPxxI (Industry) for commercial/industrial environment (IP54).
Both series of control panels enable communication between the user and the
MATRIX control system.
OP5xx The OP5xx MATRIX control panels are equipped with MATRIX.Net bus, through
which communication with air treatment units is performed.
Display of OP5xx The MATRIX control panels with display enable a menu structure as plain text
from where users can directly access numerous functions of the DencoHappel
units. The menus are adapted dynamically according to the configuration of the
unit. Thus, menus are also available for access to remote systems such as
damper or lighting controls (only through MATRIX.LON).
NOTICE!
For further information about the MATRIX.Net refer to the operation manual of
the relevant air treatment unit.

DencoHappel MATRIX OP21C Specifications

General

Brand	DencoHappel
Model	MATRIX OP21C
Category	Controller
Language	English