DencoHappel MATRIX OP21C User Manual

MATRIX control panel Operating MATRIX control panel
PR-2011-0110-GB • Subject to modifications • R9-03-2016 37
7.4.4 Enabling menu options
7.4.5 Deleting settings
Example: Activating “Week program”
• Select the "Week program" menu.
• Select the “enable / disable” menu option.
9 The “enabled” menu option appears, and the cursor stands in front of an
option field.
• Press the key "SET".
The option field changes from “empty” to “black”.
– Option field “empty” = disabled, week program switched off
– Option field “black” = enabled, week program switched on
The display changes each time the “SET” button is pressed.
• When the required condition is displayed, you have to press the “ESC” button
to save this setting and leave the menu option.
Notice!
In this case the “SET” button is NOT used for saving!
Activation
Enabled
Activation
Enabled
Example: Deleting “Week program”
• Select the "Week program" menu.
• Select the “delete program” menu option.
9 The confirmation prompt “Really delete?” appears.
• Turn the navigator one notch to the left.
Delete program
Really delete?
YES
NO

DencoHappel MATRIX OP21C Specifications

General

Brand	DencoHappel
Model	MATRIX OP21C
Category	Controller
Language	English