DAEnetIP2 v2 User Manual
21 Apr 2020
When using MAC filtering please note that while accessing from external networks to the
DAEnetIP2 v2 module arrive packets with MAC address of the Default Gateway. In this way it must
be always one of the both protected MAC addresses.
Network IP - this field can be used to restrict the SNMP access by specifying the IP
address of the remote client;
Network Mask - this field can be used to restrict the SNMP access by specifying the
Network mask of the remote client.
MAC Access protection is with higher priority than SNMP/Web access protection.
You have to reboot the device for these settings to apply.
It is highly recommended to log out from the web server after finishing the parameters setup.
If you don’t want to restrict the SNMP access by IP address, set the Access Mask to 0.0.0.0.
If you don’t want to restrict the access by MAC address, set the MAC Address 1/2 to
00:00:00:00:00:00.
Setting the Access Mask to 255.255.255.255 allows the SNMP access only from the exactly
specified Access IP Address.
You can allow the SNMP access to a range of IP addresses by setting an appropriate value for
Access Mask. For example setting the Access IP Address to 192.168.1.0 and Access Mask to
255.255.255.0 allows the access from IP addresses in range from 192.168.1.0 to 192.168.1.255.
To Next Page
Loading...
Need help?
General