Denkovi DAEnetIP2 v2 User Manual

DAEnetIP2 v2 User Manual
21 Apr 2020
- 18 -
6.6. SNMP Settings
Figure 6.8. SNMP Settings
6.6.1. SNMP Agent
These settings let you configure the SNMPv1 (Simple Network Management Protocol) (Version
1) access to the DAEnetIP2 v2:
 Agent Port - UDP port number the SNMP agent receives requests on (default port is 161).
The port must be 161 or in the range from 1025 up to 65535;
SNMP: Change of cfgSNMPport.0
 Read-only Community - community string for client‟s authentication, used in read
operations (max 12 symbols);
SNMP: cfgReadOnlyPassword.0
 Read-write Community - community string for client‟s authentication, used in read/write
operations (max 12 symbols);
SNMP: cfgReadOnlyPassword.0
 Access to IP Configuration - if disabled, there is an access only to the I/O ports of the
module;
SNMP: Change its bit in cfgMode.0

Denkovi DAEnetIP2 v2 Specifications

General

Brand	Denkovi
Model	DAEnetIP2 v2
Category	Controller
Language	English