Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting Specifications
a EXT. IN Setup
Setup playback method for analog signals inputted from external
input connectors (EXT. IN).
Audio Setup
Make settings for audio playback.
F Menu tree F
Manual Setup
Audio Setup
a EXT.IN Setup
s 2ch Direct/Stereo
d Downmix Option
f Auto Surround Mode
g Manual EQ
s 2ch Direct/Stereo
Make speaker settings for 2-channel mode playback.
Setting
To change the settings, select “Custom”.
[Selectable items]
Basic
z
Custom
z: Use the same settings as in “Speaker Setup”.
Front
Select front speaker size.
[Selectable items]
Large
Small
Subwoofer
Select subwoofer use.
[Selectable items]
Yes
No
Subwoofer Mode
Select low range signal to be reproduced by subwoofer.
[Selectable items]
LFE–THX–
LFE+Main
Crossover
Select crossover frequency from which subwoofer handles low range
signal.
[Selectable items]
THX
40Hz
60Hz
80Hz
90Hz
100Hz
110Hz
120Hz
150Hz
200Hz
250Hz
Distance FL
Set distance from listening position to front left speaker.
[Variable range]
0.0ft ~ 60.0ft
Distance FR
Set distance from listening position to front right speaker.
[Variable range]
0.0ft ~ 60.0ft
Surround Speaker
Select the surround speakers to use.
[Selectable items]
A
B
A+B
• This can be set when “Mode” is set to “Analog”.
• This can be set when GUI menu “Speaker Setup” – “Speaker
Configuration” – “Surround A” and “Surround B” are used (vpage
29).
Mode
Select playback mode.
[Selectable items]
DSP
Analog
Surround Back Input
Select surround back channel input in combination with the connected
player.
[Selectable items]
Not Used
SBL/SBR
SB(SBL)
This can be set when “Mode” is set to “DSP”.
Subwoofer Level
Set the subwoofer level for playback.
Select according to the player in use.
[Selectable items]
0dB
+5dB
+10dB
+15dB
We recommend setting to “+15 dB”.
Input Att.
Setup when input level is too large and playback volume is distorted.
[Selectable items]
OFF
–6dB
This can be set when “Mode” is set to “DSP”.
Setup
To Next Page
Loading...
