Denon AVR-1312 Manual

Specifications - Video section, Tuner Section, General Section
HOME
Video section
Standard video connectors
Input/output level and impedance 1 Vp-p, 75 Ω/ohms
Frequency response 5 Hz -10MHz, 0, - 3dB
Tuner section
(ANTENNA input – MEDIA PLAYER
OUT)
FM AM
Note: µV at 75 Ω/ohms, 0 dBf = 1x10
-15
W
Reception frequency range 87.5 MHz - 107.9 MHz 520 KHz - 1710 KHz
Usable sensitivity 1.2 µV (12.8 dBf) 18µV
50 dB Quieting Sensitivity Mono 2.8 µV (20.2 dBf)
S/N (IHF-A)
Mono 70 dB (DIRECT Mode)
Stereo 67 dB (DIRECT Mode)
Total harmonic distortion (At 1 kHz)
Mono 0.7 %
Stereo 1.0 %
SPECIFICATIONS -
AUDIO
SPECIFICATIONS -
DIMENSIONS - WEIGHT
SPECIFICATIONS VIDEO
– TUNER - GENERAL
15
General section
Power supply AC 120V, 60Hz
Power consumption 330W
Power consumption in standby mode 0.5W
Remote control unit (RC-1158)
Batteries
R03/AAA Type (two batteries)
Maximum external dimensions
1-31/32” (W) x 8-5/16” (H) x 55/64” (D) (50 x 211 x 22 mm)
Weight
3.9 oz (110 g, including batteries)
For purpose of improvement, specifications and design are subject to change without notice.

Denon AVR-1312 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Amplification Type	Discrete
Input Sensitivity	200 mV
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Signal-To-Noise Ratio	98 dB
Digital Optical Inputs	2
Coaxial Digital Input	1
Analog Audio Inputs	4
Headphone Jack	Yes
Tuner Presets	56
Dimensions (W x H x D)	434 x 151 x 319 mm
Amplifier Type	Discrete
Tuner Type	AM/FM
Preset Stations	56
Remote Control	Yes
Dolby Technologies	Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD
DTS Technologies	DTS-HD Master Audio
Output Power / Channel	75 W (8 Ohms, 20 Hz - 20 kHz, 2 channels driven, THD 0.08%)
Input Impedance	47 kOhms
Audio Inputs	2 Optical, 1 Coaxial, 4 Analog
Power Output	75W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)