Denon AVR-1513 User Manual

16
Tuning in radio stations
For antenna connections, see “Connecting an antenna”
(vpage13).
Listening to FM/AM broadcasts
The modes for receiving FM/AM broadcasts consists of “AUTO”
mode that automatically searches available broadcast stations and
“MANUAL” mode that lets you tune in using buttons to change the
frequency. The default setting is “AUTO”.
In “AUTO” mode, you cannot tune in to radio stations if the reception
is not good. If this is the case, then use the “MANUAL” to tune in.
1
Press TUNER to switch the input
source to “TUNER”.
CH LEVEL SLEEP DIMMER SEARCH
MODESHIFT
BANDMEMORYCBL /SAT
Blu-ray
DVD
GAME
AUX
VOLUME
INFO
AUDIO
BACK SETUP
MUTETONERESTORERNIGHT
RC-1170
SURROUND
AUDIO DELAY
TV AUDIO
CHANNEL
TUNE
TUNER
POWER
QUICK SELECT
ENTER
21 3 4
2
Press BAND to select “FM” or
“AM”.
FM
When listening to an FM broadcast.
AM
When listening to an AM broadcast.
GTV ScreenH
TUNER
A1
Tuning
Preset
Band
Memory
Mode
FM 87.5MHz
AUTO
Now Playing
TUNE BAND
CHANNEL
MODE
MEMORY
GDisplay of this unitH
A1 FM 87.50MHz
3
Tune in the desired broadcast station.
AUTO
Automatically tune to the station.
q Press
MODE to select “AUTO”.
MODE:AUTO
w Press TUNE + or TUNE – to select the station you want to
hear.
MANUAL
Manually tune to the station.
q Press
MODE to select “MANUAL”.
MODE:MANUAL
w Press TUNE + or TUNE – to select the station you want to
hear.
When tuning in stations manually, press and hold TUNE + or
TUNE – to change frequencies continuously.
n Presetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
•Stations can be preset automatically at “Auto Preset”
(vpage31). If “Auto Preset” is performed after performing
“Manual preset”, the “Manual preset” settings will be overwritten.
1
Tune in the broadcast station you
want to preset.
CH LEVEL SLEEP DIMMER SEARCH
MODESHIFT
BANDMEMORYCBL/SAT
Blu-ray
DVD
GAME
AUX
VOLUME
INFO
AUDIO
BACK SETUP
MUTETONERESTORERNIGHT
RC-1170
SURROUND
AUDIO DELAY
TV AUDIO
CHANNEL
TUNE
TUNER
POWER
QUICK SELECT
ENTER
21 3 4
2
Press MEMORY.
GTV ScreenH
Tuning
Preset
Band
Memory
Mode TUNE
SHIFT
BAND
CHANNEL
CHANNEL
MODE
MEMORY
MEMORY
TUNER
A1
To store preset:
select
A1-G8
GDisplay of this unitH
Storing Station
3
Press CHANNEL + or CHANNEL – to select the preset
number.
•Press SHIFT, and then the block (A – G) can be selected.
4
Press MEMORY again to complete the setting.
•To preset other stations, repeat steps 1 to 4.
Basic version
Advanced version
Information
Basic version
vSee overleaf
DVD

Denon AVR-1513 Specifications

General

Receiver type	-
Audio output channels	5.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	75 W
HDMI in	4
Composite video in	2
Digital audio optical in	1
Connectivity technology	Wired
Ethernet LAN	No
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Radio Data System (RDS)	Yes
Preset stations quantity	56
Supported video modes	1080p, 720p
Analog signal format system	NTSC, PAL
Display	LCD
Product color	Black
Audio decoders	Dolby Pro Logic II, Dolby TrueHD, DTS 96/24, DTS Neo:6, DTS-HD
Apple docking compatibility	Not supported
Graphical user interface (GUI) language	English
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7800 g