36
Listening to FM broadcasts
n Changing the tuning mode (Tune Mode)
You can change the mode for tuning into FM broadcasts. If you
cannot tune in automatically with “Auto” mode, then change the
mode to “Manual” and tune in manually.
1
Press FM to switch the input source to “FM”.
2
Press OPTION.
The option menu screen is displayed.
3
Use ui to select “Tune Mode”,
then press ENTER.
GTV ScreenH
TUNE+/- OPTION
AUTO
CH+/-
FM
CH 1
FM 87.50MHz
Tune Preset Option
Direct Tune
Option
Preset Memory
Tune Mode
Auto Preset
Preset Name
Preset Skip
GDisplay of this unitH
Tune Mode
4
Use o p to select tuning mode, then press ENTER.
GTV ScreenH
Auto
Tune Mode
GDisplay of this unitH
Mode :• Auto –
Auto
Automatically tune to the station.
Manual
Manually tune to the station.
5
Press TUNE + or TUNE – to select the station you
want to hear.
The frequency changes in steps each time the button is
pressed.
When tuning in stations manually, press and hold TUNE + or TUNE–
to change frequencies continuously.
n Changing the screen display duration
Make this setting at “Audio Display” (vpage 88) in the menu.
The default setting is “30s”.
Press uio p while the display is off to return to the original
screen.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
