EasyManuals Logo

Denon AVR-1713 Owner's Manual

Denon AVR-1713
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
102
Network
Settings
Default settings are underlined.
Make settings for wired LAN.
Only set “Settings” when connecting to a network without a DHCP function.
Setting details
Information
Network
IP Control
Friendly Name
Settings
q
DHCP
Settings
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Off
192.
168.
000.
001
255.
255.
255.
000
000.
000.
000.
000
000.
000.
000.
000
000.
000.
000.
000
Proxy
w
e
q On the menu, select “Network” – “Settings” and press
ENTER.
w Use uio p to set “DHCP” to “Off”, then press ENTER.
The DHCP function is disabled.
e Use uio p to input the address and press ENTER.
•IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses are set.
CLASS A: 10.0.0.1 – 10.255.255.254
CLASS B: 172.16.0.1 – 172.31.255.254
CLASS C: 192.168.0.1 – 192.168.255.254
•Subnet Mask : When connecting an xDSL modem or terminal adapter
directly to this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
•Default Gateway : When connected to a gateway (router), input its IP
address.
•Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentation
supplied by your provider, input it at “Primary DNS”. If there are two or more DNS addresses, input
the first one at “Secondary DNS”.
r Press BACK.
The display returns to the playback screen.
•When connecting to the network via a Proxy server, select “Proxy” and press ENTER (vpage103
“Proxy settings”).
Setting details
•If you are using a broadband router (DHCP function), there is no need to make the settings at “IP
Address” and “Proxy”, since the DHCP function is set to “On” in this unit’s default settings.
•If this unit is being used connected to a network without the DHCP function, the network settings
must be made. In this case, some knowledge of networks is required. For details, consult a network
administrator.
•If you cannot connect to the Internet, recheck the connections and settings (vpage18).
•If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the
store from which you purchased your computer.
•When you want to cancel the setting during IP address input, press o or BACK.
Basic version
Advanced version
Information
Advanced version
v See overleaf
DVD

Table of Contents

Other manuals for Denon AVR-1713

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1713 and is the answer not in the manual?

Denon AVR-1713 Specifications

General IconGeneral
Receiver type-
Audio output channels5.1 channels
Audio A/D Converter (ADC)24-bit/96kHz
Power output per channel (1KHz@6 Ohm)120 W
Power output per channel (20-20KHz@8 Ohm)80 W
HDMI in5
Composite video in2
Digital audio optical in1
Ethernet LANYes
Preset stations quantity56
Internet radio services supportedLast.fm
Supported video modes1080p
Analog signal format systemNTSC, PAL
DisplayLCD
HDMI version1.4
Product colorBlack
Audio decodersDolby Pro Logic II, Dolby TrueHD, DTS 96/24, DTS Neo:6, DTS-HD
Apple docking compatibilityNot supported
Graphical user interface (GUI) languageEnglish, French, German
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth332 mm
Width435 mm
Height151 mm
Weight8300 g

Related product manuals