26
Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey
®
Setup.
1
Use ui to select “Parameter Check” and then press ENTER.
Audyssey Setup
Your AVR can automatically measure the
acoustics of your room and the optimize
your speakers.
Start
Parameter Check
Parameter Check
Speaker Config.
Distances
Levels
Crossovers
Equalizers
Restore...
2
Use ui to select the item you want to check, then press ENTER
or p.
Measurement results for each speaker are displayed.
Speaker Config.
Check the speaker configuration.
Distances
Check the speaker distance.
Levels
Check the speaker channel level.
Crossovers
Check the speaker crossover frequency.
Equalizers
Check the equalizer.
•If “Equalizers” is selected, press
ui to select equalizing curve (“Audyssey” or “Audyssey Flat”) to
be checked.
Use o p to switch the display between the different speakers.
3
Press BACK.
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey
®
Setup settings
If you set “Restore...” to “Yes”, you can return to Audyssey
®
Setup measurement result (value calculated
at the start by MultEQ
®
XT) even when you have changed each setting manually.
Set up speakers (Audyssey
®
Setup)
Making the network settings
(Network)
This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and
still image (JPEG) files stored on a computer.
1
Connect the Ethernet cable (vpage 18 “Connecting to a home network (LAN)”).
2
Turn on this unit (vpage 27).
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the setting in “Settings”
(vpage102).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
